206 Top quality IMPACT DRIVER. Has
3/8" Sq. Driver for sockets. Also
use with 1/4" (207A) and 5/16" (207) Hex Bit Adaptors. It works quickly to
loosen or tighten by changing hammer blow to rotary motion. It has 4" long
handle, 4-3/4" o.a.l. Weight 1.1 lb.
206L Same as 206 but with 4-1/2" handle
(5-1/4" o.a.l.). Good for daily
use to protect hands. Weight 1.29 lb.
207 5/16" Hex Bit Adaptor for hex and
screwdriver bits. Weight 0.1 lb.
1-1/4" long.
207A 1/4" Hex Bit Adaptor for all 1/4"
hex body bits. Weight 0.11 lb.
208 3/8" Square Drive IMPACT DRIVER 6-piece
SET in vinyl pouch.
Contains 206 Impact Driver, 207 Adaptor plus two straight bits (206-516R, 206-38R) and two
Phillips bits (206-2P, 206-3P). Weight 1.34 lb.
209 Impact Driver Set in vinyl pouch. Contains
206 Impact Driver, 207
Adaptor plus seven bits (206-516R, 206-2P, 206-3M, 206-4M, 206-5M, 206-6M, and 206-8M).
1.43 lb.
|
NEW 1/2" Square Driver
206-2 1/2" Sq. Drive for
1/2" sockets. Same top quality as 206 Driver.
It has 4-1/2" long handle, 5-1/4" o.a.l. Weight 1.4 lb.
The following 5/16" hex bits are made in Taiwan: All
may be ordered seperately
206-2P No. 2 Phillips
206-3P No. 3 Phillips
206-4P No. 4 Phillips
206-516R 5/16" Straight
206-38R 3/8" Straight
206-12R 1/2" Straight
206-3M 3mm hex key
206-4M 4mm hex key
206-5M 5mm hex key
206-6M 6mm hex key
206-8M 8mm hex key
1234 Set of four
most popular bits in bag. (206-2P, 206-3P, 206-516R,
206-38R). Weight 0.12 lb.
1236 Set of six bits in bag. (1234 +
206-4P + 206-12R). Weight 0.19 lb.
1238 Set of five metric bits in bag (206-3M,
206-4M, 206-5M, 206-6M, and 206-8M). Weight 0.14 lb.
1239 Set of seven bits in bag. (1238 + 206-2P +
206-516R). Weight 0.19 lb.
208F Low-cost 3/8" Square Drive Impact
Driver 6-piece Set in clear
clamshell with hangtab, 3-1/2" x 2-1/4" x 10-1/2" high. Made in Taiwan for
the occasional user. Has plastic form-fitted 4" handle. Weight 0.77 lb. |
Head Alignment Tools (H.A.T.) are for Detroit Diesel Engines ONLY.
U.S. Patent No. 4,570,320
The H.A.T. virtually eliminates the possibility of gasket dislocation or slippage
(especially in tight places or on the road) and also assures you of a job well done.
1. User has complete visual access so inspection of gasketing can be made
safely and easily after the head is placed on the block. The 6" long studs hold head
2" off of block.
2. Allows physical access for final positioning of gasketing SAFELY.
3. Establishes easy positioning for head alignment in tight places.
4. Has a deactivating flex assembly with left-hand threads to be used
only after a thorough inspection of surface areas has been satisfactorily completed.H71
for 71 Series and most 53 Series Detroit Diesel Engines. Wooden box.
Weight. 1.9 lbs.
H92 for 92 Series Detroit Diesel Engines. Wooden box. Weight 2.10 lbs. |